Adjust the stitch regulator to 8 stitches per inch. Lower the needle on the stitched hemline of section A. Lower the presser foot after the threads have been drawn between the toes to the back of the machine.
Backstitch until the needle pierces folded edge, or knot the thread according to directions on [page 21]. Then adjust the stitch regulator to forward motion.
Stitch following the line you have marked, stitching on it as much as possible. Apply little pressure onto the knee lever or foot pedal so the machine will not move too fast.
When you reach the point of the pocket, lower the needle into the point of material, raise the presser foot, turn the material around, lower the presser foot again, and stitch to the next point. The presser foot needs to be raised and lowered in this manner each time you want to turn a corner.
Stitch to the fold of the hem. When you reach the fold, backstitch to the stitching line of the hem.
With your small scissors clip the threads close to the stitching line.
Sew sections A and B together
The side seams of the case must still be stitched together. This is done on the outside of the case.
