RING OILING OUTRIGGER BEARING AND SELF LUBRICATING LOOSE PULLEY
The Fast Pulley is usually made slightly larger in diameter than the Loose Pulley and is secured to the shaft by a Woodruff key and set screws.
THE OUTRIGGER for supporting the Driving Pulleys can be applied at either the head or foot end, as specified.
Our improved Cylinder Head is made with a wide surface for the tin and has a long hub split at the end for several inches.
The split portion of the hub is made to grip the shaft by means of a heavy clamp ring and set screw. The shaft cannot be cut by this set screw as it bears on the split hub.
CYLINDER HEAD BEARING AND CAP
The shafts are steel, fitted with Woodruff Keys and Phosphor Bronze Bushes with Collars, which make the bearings self-oiling and practically free from wear. Heavy tin is used in the construction of the Cylinders which are carefully balanced and thoroughly tested.