Output to be measured at generator. Do not exceed the above rates.
Battery
Use only distilled water to cover plates. This should be done as frequently as found necessary. An average of every two weeks during the summer months (less frequently in cooler weather).
Lamp Bulbs
| Candle Power | Base | Voltage | |
|---|---|---|---|
| Headlamp (double filament) | 21-21 | Double Contact | 6-8 |
| Parking (in headlamp or on front fenders) | 3 | Single Contact | 6-8 |
| Telltales (on instrument board) | 3 | Double Contact | 6-8 |
| Instrument Board | 3 | Single Contact | 6-8 |
| Stop and Tail Lamp (double filament) | 2-21 | Double Contact | 6-8 |
| Dome | 15 | Single Contact | 6-8 |
| Fuse (at lamp switch) | 20 Amperes |
Engine
Firing order of cylinders—1-5-3-6-2-4.
Tappets
Adjust when engine is hot. Minimum clearances—inlet valves, .006" (.15 mm.); exhaust, .008" (.20 mm.). Counting from the front, intake tappets are 2-4-5-8-9-11 and exhaust tappets 1-3-6-7-10-12.