Distinctly more myrabs are used than in sole leather tannages, in the dry material, and amongst the extracts chestnut is preferred to quebracho, and myrabs to mimosa bark, though all these may be used in some degree. In the past the most favoured extract has been undoubtedly gambier, which gives a tannage which is easily curried and imparts the required mellowness to the uncurried leather. The great expense of this material, however, together with the advent of drum stuffing and shorter tannages in stronger liquors, have tended to cause a considerable reduction in the proportion used for strap butts, and to limit its employment to the earlier stages of tanning.
The same tendencies for reducing the time taken to tan, employing stronger liquors, and securing economy of labour in handling, have been evidenced in the tannage of strap butts as in sole butts. It is nevertheless true that, broadly speaking, strap butts receive rather more handling and rather weaker liquors than sole butts. A greater amount of mechanical assistance is also employed with early stages (paddling, drumming, rocking). This is less objectionable for curried leather than for sole butts. The handling is more usually in suspension. The liquors are usually worked straight down the yard as a greater mellowness is needed in the early liquors than for sole butts. The offal is given a separate tannage and often used for different purposes, e.g. the shoulders for welting and the bellies for fancy goods. Plumping with sulphuric acid is generally considered inadmissible for strap butts. It has been shown that leather containing sulphuric acid tends to perish after the lapse of a number of years. Sole leather will be worn up before this effect is observed, but belting is an article which is intended to last much longer, and the use of sulphuric acid is consequently inadvisable. Plumping must be obtained, to a considerable extent, but must be achieved by the organic acids (lactic, acetic, formic and butyric acids). A few gallons of such acids are consequently added to the handlers, especially in the winter and spring. Less may be used in the autumn, when the layer liquors which fermented in the summer months have worked down to the suspenders. A mixture of these acids is usually better than any one alone, for they not only differ very considerably in price, but also have different powers of neutralizing lime and plumping the goods. Lactic acid (M.W. 90), Acetic acid (M.W. 60), and formic acid (M.W. 46) are each monobasic acids; consequently 3 lbs. formic will neutralize as much lime as 4 lbs. acetic or 6 lbs. lactic. Their plumping powers are somewhat influenced by the anion. In determining what quantities to take, the commercial strength of the acids must also be considered. Formic is often 80-90 per cent. pure, acetic 60-80 per cent., and lactic 40-60, but may be as low as 25 per cent. The blend must be adjusted accordingly. As strap butts do not need the firmness of sole leather, less of these acids may be used than for sole butts.
The exact nature of the tannage and the strength of the liquors is largely influenced by commercial considerations. If the manufacturer is both tanner and currier, he need not go to such great expense in strong liquors and in time in layers, for he can obtain some of this weight in currying. If, however, the tanner sells the butts rough dried, he must naturally aim at obtaining greater weight in tanning.
The actual details of the tanning processes are as usual very varied, but may be classified according to type, just as in the case of sole butts.
Illustrations will now be given.
Type 1, which may be compared with Type 1 for sole butts, is a tannage of about 5 months. The goods pass through suspenders (8°-30°) in 2½ weeks, and then pass to the handlers (30°-50°), in which they remain a month; they are then put into suspension again and pass through the suspender handlers (40°-55°), which takes 2½ weeks. In this round much gambier is added, and the goods are frequently handled. Four layers are usually given, viz. first layer 55°, one week; second layer 60°, two weeks; third layer 65°, four weeks; and fourth layer 75°, four weeks. The tannage is thus 20 weeks, of which 11 weeks (55 per cent.) are in layers. Extra layers may be given to heavier goods, using stronger liquors made up with extract. All liquors work straight down the yard.
The tannage consists of 35 per cent. myrabs, 35 per cent. valonia, 10 per cent. Natal bark, and 20 per cent. extract, chiefly gambier, though some chestnut and quebracho are used.
Type 2 represents the modern tendency to use stronger liquors and a shorter time. The strap butts pass through the suspenders (22°-50°) in 1½ weeks, during about a third of which time they are rocked. They next pass through two sets of suspender-handlers (50°-67° and 67°-80°), which takes a month, and thence to the layers. Three layers are given (85°, 90° and 100°), in which the goods remain one, three and four weeks respectively. The tannage is thus 13½ weeks, of which 8 weeks (nearly 60 per cent.) are in layers. The liquors work down the yard. Longer time may be given to heavier goods. The tannage consists of 40 per cent. myrabs, 35 per cent. valonia or Natal bark, and 25 per cent. extract, chiefly chestnut, though some gambier may be added to the suspenders.
However tanned, strap butts are first dried out rough over poles. This assists in making the tannage permanent, on account of secondary changes discussed in Section III., p. [46]. They are next wet back for currying by soaking in water or sumach liquor for a few hours and piling to become soft and even. The first operation is "skiving," which is a light shaving on the flesh side, carried out by a sharp slicker with a turned edge. The butts are next scoured thoroughly by machine on both flesh and grain, and sumached in a vat for several hours at 100° F., after which they are slicked out and hung up in a cool shed to samm for stuffing. Hand stuffing is often still preferred, with tallow and cod oil. The butts are next set out, and it is important that this should be thoroughly done. Machines are now generally used, and the goods are often reset after further drying. After drying out completely they are given a light coating of tallow and laid away till wanted for cutting up into straps, which is now done by machinery.
A Continental method for making belting leather is to give 6 weeks in a suspender set (70°-24°) of twelve pits arranged on the press system, running two fresh liquors a week, and to give them two layers (24° and 28°) of 6 and 8 weeks. The material is chiefly pine bark, but some oak bark, valonia, myrabs and quebracho are also used. The goods are stuffed by "burning in," molten fat being poured on the flesh side.