COST OF PLACING FRAME AND COVERING

By One Man

HRS. PER 1000 B.M. FT.
Sills and plates 6" × 8", no gains or mortises20
Sills and plates 6" × 8", gains no mortises40
Sills and plates 6" × 8", gains and mortises60
Joists and box sills20
Studding 2" × 4"32
Studding 2" × 6"23
Rafters 2" × 4", plain gable roof40
Rafters 2" × 4", hip roof add 5% to 30% for each hip or valley.
Rafters 2" × 6", plain gable roof27
Rafters 2" × 6", hip roof add 5% to 30% for each hip or valley.
Sheathing, square edged, horizontal, walls16
Sheathing, square edged, diagonal, walls19
Sheathing, 6" matched, walls24
Sheathing, 6" matched, walls diagonal32
Sheathing for floors, sub-floors, square edged10
Sheathing for floors, sub-floors, square edged diagonal12
Roof Sheathing, plain gable roof13
Roof Sheathing, hip roof20
Cornices400 to 800
Water table, 3 member220
Corner boards73
Belt195

HRS. PER M.
Shingling, plain roof, new work
Shingling, hips and valleys, add 5% for each hip or valley.
Shingling, old work, add 20% for labor in removing old shingles.
Shingling side walls, plain
Shingling side walls, fancy8

HRS. PER 1000 B.M. FT
Siding, bevel, 6"35
Siding, bevel, 4"42
Siding, shiplap27
Siding, drop, when window and door casings and corner boards are placed over siding120
Siding, drop, when jointed between casings and corner boards32
Surfaced barn boards11½
Ceiling, store53
Wainscoting, cut, put up, finished with cap and ¼ round, in a dwelling46

COST OF PLACING FLOORS

By One Man

HRS. PER 1000 B.M. FT.
Floors, pine35
Floors, yellow pine, 3¼" face, laid on sheathing, including paper between, smoothing rough joints, business block40
Floors, yellow pine, 3¾" face, laid direct on joist, no smoothing26⅔
Floors, yellow pine, 3¼" face, smoothed and sanded45
Floors, maple, 2¼" face, laid not smoothed40
Floors, maple, 2¼" face, laid and smoothed80
Floors, maple, 1½" face, laid and well smoothed107
Floors, oak, fine floor, glued, smoothed, scraped, sand papered320

COST OF BRIDGING AND FURRING

HRS. PER 1000 LIN. FT.
Bridging65
Placing plaster grounds20

COST OF PLACING BASEBOARDS

HRS. PER 1000 LIN. FT.
Baseboard, three member, hardwood, average number miters10
Baseboard, two member, scribed to floor16
Baseboard, plain, ¼ round at floor8
Moulding, bed, flat, 3"