As the first point of Aries makes a complete circuit of the heavens in twenty-four hours, it must move at the rate of 15° an hour, or of 1° in four minutes: hence, when the astronomical clock marks 1, the first point of Aries must be 15° west of the meridian, and when it marks 2, 30° west of the meridian, etc. That is to say, by observing an accurate astronomical clock, one can always tell how far the meridian at any time is from the first point of Aries.
17. How to find Right Ascension with the Meridian Circle.—To find the right ascension of a heavenly body, we have merely to ascertain the exact time, by the astronomical clock, at which the body crosses the meridian. If a star crosses the meridian at 1 hour 20 minutes by the astronomical clock, its right ascension must be 19°; if at 20 hours, its right ascension must be 300°.
To enable the observer to ascertain with great exactness the time at which a star crosses the meridian, a number of equidistant and parallel spider-lines are stretched across the focus of the telescope, as shown in Fig. 21. The observer notes the time when the star crosses each spider-line; and the mean of all of these times will be the time when the star crosses the meridian. The mean of several observations is likely to be more nearly exact than any single observation.
Fig. 21.
Fig. 22.
18. The Equatorial Telescope.—The equatorial telescope is mounted on two axes,—one parallel with the axis of the earth, and the other at right angles to this, and therefore parallel with the plane of the earth's equator. The former is called the polar axis, and the latter the declination axis. Each axis carries a graduated circle. These circles are called respectively the hour circle and the declination circle. The telescope is attached directly to the declination axis. When the telescope is fixed in any declination, and then turned on its polar axis, the line of sight will describe a diurnal circle; so that, when the tube is once directed to a star, it can be made to follow the star by simply turning the telescope on its polar axis.
In the case of large instruments of this class, the polar axis is usually turned by clock-work at the rate at which the heavens rotate; so that, when the telescope has once been pointed to a planet or other heavenly body, it will continue to follow the body and keep it steadily in the field of view without further trouble on the part of the observer.
The great Washington Equatorial is shown in Fig. 22. Its object-glass is 26 inches in diameter, and its focal length is 32-1/2 feet. It was constructed by Alvan Clark & Sons of Cambridge, Mass. It is one of the three largest refracting telescopes at present in use. The Newall refractor at Gateshead, Eng., has an objective 25 inches in diameter, and a focal length of 29 feet. The great refractor at Vienna has an objective 27 inches in diameter. There are several large refractors now in process of construction.