Fig. 7.
Splice Grafting is the simplest process, and is applicable only where the size of the stock and of the scion correspond pretty nearly; the two are cut with a sloping curve, each of which being made at the same angle, will coincide with the other when they are applied together, as represented in the engraving, fig. 7.
Fig. 8.—WHIP GRAFTING.
Whip Grafting is a modification of the above. Each portion is cut in a sloping manner as in the splice grafting, but each is also split with a thin-bladed knife, as represented in fig. 8. The object in this is to give a firmer union to the two portions, and also to present a more extended surface for the effusion of the new cell tissue that is to form the bond of union in cementing them together. In both these methods, but especially in the first, the parts must be held together in co-aptation by some kind of bandage; this is generally composed of grafting wax, spread upon cloth or paper, or even, as now extensively practiced, upon fine thread. Cotton yarn No. 3 is drawn through melted grafting wax, and as it cools, it is wound upon a reel at the other side of the room, whence it is drawn as wanted by the grafter or tyer. Tying or wrapping is always a good precaution, and when the splice or cleft graft is not very close, it becomes necessary; but thousands of grafts will unite equally well where the parts are covered with earth, without any such appliance.
Fig. 9.—DIFFERENT STEPS IN CLEFT GRAFTING. A, SCION PREPARED FOR SETTING. B, THE CLEFT OPENED BY A WEDGE.
C, THE SCION INSERTED. D, SECTION OF STOCK AND SCION TO SHOW THE CO-APTATION OF THE PARTS OF THE TWO.
Fig. 10.—CLEFT GRAFTING WITH
BOTH SCIONS INCLINED INWARD.