The Woods Most in Use.—Various woods are now employed for making gun stocks, but among them all, the most popular, perhaps, is black walnut. It is deservedly so from the fact that it is light, works easily, takes a superior polish, has a rich dark color, naturally, and when finished up does not incline to “check.” So popular is it, indeed, that most of the other woods worked into gun stocks are stained and finished up to imitate walnut.
In some portions of the country hard or sugar maple (“sugar tree”) is worked quite extensively by the local gunsmiths. It makes a very nice stock, finishing to good advantage, especially “curled maple,” which is really beautiful. Soft maple is also extensively used, stained and finished to imitate either hard maple or walnut.
The common dogwood makes an excellent gun-stock, but it works badly on account of the smallness of the tree rendering it difficult for one to get the pieces sawed out in proper shape at the beginning. Holly also makes a good stock, but presents the same objection as the dogwood. Cherry has few superiors, but it is now becoming a very scarce wood. Sweet gum is getting to be quite extensively used for cheap guns, stained to imitate either walnut or cherry. It has fine grain, and works very well, the chief objection to it being that it is wonderfully inclined to warp.
Wood for Gun Stocks.—The wood for a gun stock should combine strength and lightness, and at the same time it is desirable that it be easy to cut. The fibres of the wood should be close and possess great cohesion and should be little liable to split.
In this country black-walnut is generally selected for shot guns, and either black-walnut or hard maple for rifles. The grain of the wood should be straight at the small of the stock, which is the weakest portion of the work. Between this and the end of the breech it little matters how the grain runs. If there be curls, waves or a hard knot, let it come about midway between the small and the end of the butt. As the wood at this place is simply “rounded” it is easy to work it into shape, as the shape given to it is such that any deviation of the fibres or grain from a straight line can be shown to the best advantage, also at this place there is less demand for strength of wood than at any other part of the gun stock. Around the small it is very necessary that the grain be straight and run in the direction of the shape given and also continue straight until past the place where the locks are set in. A little distance in front of the barrel breech it matters but little how the grain runs, but if the fibres of the wood where the barrel is let in run toward the breech it will be found to be easier to work out for the reception of the barrel. For then as the tools are worked toward the breech they are cutting with the fibres or grain and not against it. But as the majority of guns are now half-stocked the distance to cut in order to let in a barrel is so small that but little attention need be paid to the grain at this spot.
The best and most serviceable stocks are those made from parts of the tree where large branches join the trunk. In these parts, too, will be found the curled and irregular grain that is so much admired when the stock is so made that these irregularities come in the stock a little in front of the butt plate. When large trees are cut down, it will be observed very often that there are portions of the stump that have a kind of convex form, and extending downward terminate in large roots. If these be dug out or separated from the stump by splitting them, they are almost always of a proper shape, to have the grain run nearly straight in the curves as given to the stock. In black-walnut and hard maple these root portions are very firm of fibre, quite hard and have a splendid grain that finishes up beautifully. Portions of some root pieces have a mottled appearance and are of a different color from the wood as cut from the trunk of the tree; this is especially the case with black-walnut. As these stumps can be had by the trouble of removing them, the gunsmith can very cheaply secure pieces of wood that are very valuable. Oftentimes black-walnut stumps are found floating in the water, and on the banks of western rivers, that are perfectly sound and so darkened by water soaking that they make beautiful stocks.
The dryness and fitness of the wood may be ascertained by the easy crumbling of the shavings and by the dryness of the sawdust. It is necessary that the wood be well seasoned, for if any moisture or sap remains in it, the barrel and portions of the lock that come in contact with the wood, will in a short time be covered with rust.
CHAPTER XIV.
ON GUN STOCKS.
Form of Gun Stocks.—When a customer orders a stock to be made, or has a gun to be re-stocked, the gunsmith will observe the length of his customer’s arms, length of neck, his height and general carriage. From these he can gather some data as to the length and form of stock to be made. Give him a gun, and observe his mode of raising it and taking aim, and the manner of his holding his head while aiming, and deductions may be drawn as to what the customer requires.