While Jackson had an influence on a small coterie, it did not prolong the life of the color woodcut. In Europe the medium did not survive his disappearance in 1755; no doubt it seemed to later artists intractable and lacking in nuance. The black-and-white woodcut, moreover, went into further decline and was almost entirely disregarded except for the rudest sort of work. Almost a century and a half were to pass before Gauguin and Munch swept aside old taboos and found exciting new possibilities for color in the woodcut process.
The lack of interest in the color woodcut was also the result of new techniques in the copper-plate media, techniques that could be adapted to color printing. In 1756 J. C. François introduced the crayon manner, an etching process that could imitate the effects of chalk and crayon drawings. During the following decades numerous technical variations were developed, the most popular being the pastel manner, the stipple, and the aquatint.
Of these methods only aquatint survived after early years of the 19th century. It was less limited than its companion processes and had wide application in rendering the effect of water-color wash. But color work in this medium, however attractive to a public that appreciated delicacy and charm, did not have mass appeal. The new audience created by the advancing Industrial Revolution wanted printed pictures of a less subtle type; they preferred imitations of sentimental,
banal, story-telling oil paintings with a high, waxy finish. Neither aquatint nor other copper-plate media were suitable for these products, and color lithography did not receive serious attention until the late 1830’s. The wood engraving, which had inherited the function of the woodcut and which had greater flexibility in rendering tones and details, became the logical vehicle for the new color picture.
In this situation Jackson suddenly appeared as the pioneer, as the father of printed pictures based upon paintings in oil or water colors. His intention had been translation rather than imitation and he would have abhorred the feeble new product, but this did not concern his successors—they were interested only in his technical principles. Moreover, in their naïveté, they imagined they were improving on Jackson because their prints were counterfeit paintings while his were not.
The earliest picture printers therefore, used wood engraving. Among them were Frederich W. Gubitz of Berlin, who began the revival about 1815; William Savage[55] of London, a printer who published a book describing his project in 1822; and George Baxter of London, whose work dates from about 1830. All started with chiaroscuro and moved to full color from a large number of wood blocks, although in 1836 Baxter began printing his transparent oil colors over a base of steel engraving reinforced with aquatint. Only Baxter persevered and was rewarded by sensational popular success. His glassy and trivial prints with their high sweet finish enjoyed a vogue among collectors that lasted into the 20th century. In about 1860, however, he was driven from the market by the rise of a cheaper medium, chromolithography, which was responsible in the next few decades for a universal outpouring of popular bathos. This was picture printing in color geared for the mass audience.
It may seem an anticlimax to trace the color woodcut from Jackson to Baxter, and finally to chromolithography, but it is not irrelevant. Although spurned by the better artists, color had too popular an appeal to be ignored. It was inescapable that Jackson’s successful technical procedures should finally be adopted and corrupted in the area of commerce.
Woodcut artists up to Jackson, with few exceptions, had used color for one major purpose, to reproduce drawings in line and tone. By enlarging the conception of the color woodcut Jackson brought the primitive chiaroscuro phase of its
history to an end. After him, the chiaroscuro could not be practiced again except as an archaism.[56] The way was open for the modern woodcut, although it was a long time in coming.
The range of Jackson’s work in tone and color exceeded that of all previous woodcutters and can be divided as follows: (1) chiaroscuros—after drawings, after paintings, after his own pen and ink drawings after paintings, interpretations of engravings and etchings, and interpretations of sculpture; and (2) full color—after paintings in gouache and after his own water colors. In addition he treated pictorial subjects in flat color areas without a key or outline block, a procedure used before him only by the 17th-century Chinese; and he combined burin work with knife cutting.