The resistance of copper wire (the usual conducting path), being very low causes little rise in temperature, but the air in the opening or break has a resistance of many thousands of times the resistance of the copper; hence the current passing across the opening spark or gap raises the air to an exceedingly high temperature.
With a comparatively heavy current flowing across the break, the temperature developed is high enough to boil or vaporize any metal in contact with the spark or flame, rendering the metallic vapors incandescent. With sufficient current, the ends of the wires which constitute the break may be melted away.
For the successful and continuous operation of the engine it is imperative that ends of the conducting path or terminals be made of a metal of a high fusing point in order to withstand the heat of the spark and also that the current be kept to as low a value as possible.
In actual construction the spark gap terminals are generally made of platinum or platino-iridium, or an alloy of high fusing point. Iron is sometimes used, but deteriorates rapidly. Nickel steel lasts longer than common iron or steel but is not as durable as platinum or its alloys.
As the temperature of the electric spark or arc is approximately 7,500° F., and the ignition temperature of an ordinary rich gas at 70 lbs. compression is 1,100° F., it is evident that the quantity of current for ignition may be kept to an exceedingly low value. High compression increases the resistance of the spark gap, and requires higher electrical pressure to force a given current across a gap of given length.
(79) Sources of Current.
The electric current that causes the ignition spark is usually generated or supplied by one of the three following methods:—
1. By the primary battery which converts the chemical energy of metal, and some corroding fluid, into electrical energy, by chemical means.
2. By the magneto or dynamo that converts mechanical work or energy into electrical energy through the method of magnetic induction.
3. By the storage or secondary battery which acts as a reservoir or storage tank for current that has been generated by either of the two above methods. A storage battery simply returns electrical energy that has been expended on it by an external generator. A storage battery does not really generate electricity but as it is often used as a source of current for an ignition system, we will consider it as a generator.