No. 14. Bowl for Toilette, &c.
(Requiring [Exercises] 5, 7, 12, 8, 9, 10, 15, 26, 13, 28, 29, 6, and 24.)
This model is shown in the perspective Fig. 1 of [drawings No. 14]. Commence for it by cutting from Beech a piece about 5 in. long, 3 in. wide, and 11⁄4 in. thick. Plane one side and one edge at right angles. Then gauge for a thickness of 1 in. and plane the rough side to the gauge lines. Determine by choice which side shall be the bottom of the bowl and which the top. Find the centre of the bottom side by drawing the lines from A to B and from C to D as shown in Fig. 2. Repeat these lines on the edges and top side, using the try square. Then, on the bottom side, with compasses and square, draw the whole of the figures constituting the entire diagram shown by Fig. 2, and on the top side draw freehand the larger oval or ellipse diagram shown by Fig. 3, being guided by the points of the guide-lines first drawn for the purpose.
