The first figure, that is the figure to the left on the adjoining page, shows the stencil, or pattern, as it is cut from regular stencil stock for use in air brush work or other decorative methods.
The card in the center shows the design after being copied on the showcard. The stencil itself was placed on white showcard, size 14×22, and the air brush color was blown about the margin of the stencil, with the result as shown. The lettering on this design was done with a large size model “C” Speed Ball pen.
The two cards shown to the right are illustrations of how to proceed in doing “spatter” work. The card at the top shows the panel cut out, and this was placed over the card shown just below. The spatter was done with light green color, and the method employed was as follows:
A brush similar to that used in cleaning typewriters was used with regular air brush ink, and this brush was moved backward and forward across the blunt edge of a knife blade. The face of this panel was then lettered as shown. This lettering was done with a large size model “C” pen.
Students who desire to further familiarize themselves with air brush work, should write to the various manufacturers of air brushes, and get literature on this interesting subject. Stencils may also be procured from showcard supply firms or from the manufacturers themselves. Patterns from stencils may also be copied from wall paper designs, pictures, etc., and then cut out with a very sharp knife.
“Air brush” is a name for a finely made tool which has a very delicate spray, operated by means of air pressure.
It is necessary, of course, to attach the air brush to some sort of tank containing air, and for those who use the air brush a great deal, nothing is more convenient than the carbonic air tank furnished by any carbonic gas company.
It is necessary to attach an air regulator to such an air tank. Bear in mind that an air regulator is a combined regulator and pressure gauge.
In addition to the air brush, it is necessary to have extra color cups and about eight feet of rubber hose to attach to the tank.
Ordinary spatter work may be done in a great many ways, in addition to the method mentioned here.