Not unfrequently acute poisoning symptoms result to sewer men. Probably sulphuretted hydrogen gas is not wholly responsible for them, nor for the chronic symptoms complained of by such workers (inflammation of the conjunctiva, bronchial catarrh, pallor, depression).
In the distillation processes connected with the paraffin industry fatalities have been reported.
CARBON BISULPHIDE
Manufacture.—Carbon bisulphide is prepared by passing sulphur vapour over pure coal brought to a red heat in cast-iron retorts into which pieces of sulphur are introduced. The crude carbon bisulphide requires purification from sulphur, sulphuretted hydrogen, and volatile organic sulphur compounds by washing with lime water and subsequent distillation.
Use is made of it principally in the extraction of fat and oil from bones and oleaginous seeds (cocoanut, olives, &c.), for vulcanising, and as a solvent of rubber. It is used also to extract sulphur from gas purifying material and for the preparation of various chemical substances (ammonium sulphocyanide, &c.), as well as for the destruction of pests (phylloxera and rats).
Fat and oil are extracted from seeds, bones, &c., by carbon bisulphide, benzine, or ether, and, to avoid evaporation, the vessels are as airtight as possible and arranged, as a rule, for continuous working.
Vulcanisation is the rendering of rubber permanently elastic by its combination with sulphur. It is effected by means of chloride of sulphur, sulphide of barium, calcium, or antimony, and other sulphur-containing compounds, heat and pressure, or by a cold method consisting in the dipping of the formed objects in a mixture of carbon bisulphide and chloride of sulphur. The process of manufacture is briefly as follows: The raw material is first softened and washed by hot water and kneading in rolls. The washed and dried rubber is then mixed on callender rolls with various ingredients, such as zinc white, chalk, white lead, litharge, cinnabar, graphite, rubber substitutes (prepared by boiling vegetable oils, to which sulphur has been added, with chloride of sulphur). In vulcanising by aid of heat the necessary sulphur or sulphur compound is added. Vulcanisation with sulphur alone is only possible with aid of steam and mechanical pressure in various kinds of apparatus according to the nature of the article produced. In the cold vulcanisation process the previously shaped articles are dipped for a few seconds or minutes in the mixture of carbon bisulphide and chloride of sulphur and subsequently dried in warm air as quickly as possible.
In view of the poisonous nature of carbon bisulphide, benzine is much used now. In the cold method use of chloride of sulphur in benzine can replace it altogether.