In [Fig. 977] is shown a right-hand side tool for brass work. It is used to carry cuts along short work, and to carry facing cuts at the same time, thus avoiding the necessity to move the position of the tool to enable it to carry a facing cut, as would be necessary if a front tool for brass were used. It is peculiarly adapted, therefore, for brass bolts, or other short work having a head or collar to be faced especially; hence, it may be traversed to its cut in either direction without requiring to be moved in the tool post. It may also be used to advantage for boring purposes. It will be found that this tool will cut smoother and will be less liable to chatter if its top face is ground slightly down towards the point and if it be not forged too slight either in depth or across b. Its clearance on the side is given by forging it to the diamond shape shown in the sectional view. To make the tool a left-handed one it must be bent to the right, the clearance being in any case on the inside of the curve.
Fig. 978.
Fig. 979.
The forms of single-pointed slide rest tools employed to cut V-threads in the lathe are shown in [Fig. 978], which represents a tool for external, and [Fig. 979], which represents one for an internal V-thread, the latter being a tool ground to accurate shape and secured in a holder by the set screw s.
