“Now, what results did you get?”
Wade shook his head doubtfully. “We all know it's amazing stuff—and of course, it must be heavy—but still—well, anyway, I got a density of 103.5!”
“Whewww—103.5! Lord! That's almost five times as heavy as the heaviest metal hitherto known. There's about half a cubic foot of the material; that would mean about 4000 pounds for the whole mass, or two tons. No wonder we couldn't lift the plate!”
They stopped their work on the Kaxorian apparatus to discuss the amazing results of the density test, but now they fell to again, rapidly assembling the device, for each was a trained experimenter. With all but the final details completed, Arcot stood back and surveyed their handiwork.
“I think we'll have enough urge to cause disintegration right here,” he said, “but I want to make sure, and so, before we set up the case over it, I think we may as well put that big magnet in place, and have it there to help in the work of disintegration, if need be.”
At last the complete apparatus was set up, and the tiny bit of light-matter they were to work on was placed on the table of a powerful Atchinson projector microscope, the field of view being in the exact center of the field of both the magnet and the coil. Carefully, then, step by step, Arcot, Morey and Wade went over their work, checking and rechecking.
“Well, we're ready,” said Arcot finally, as he placed the projector screen in position and dimmed the lights in the room. A touch of the switch, and the projection screen was illuminated with the greatly enlarged image of the tiny scrap of light-metal.
With his hand on the switch, Arcot spoke to the other two. “I won't say there's no danger, since we haven't done this before; and if all the energy should be released at once, it'll blow the top out of the building. But I'm reasonably sure that it will work safely. Any objections?”
Wade shook his head, and Morey said: “I can't see any flaws in our work.”
Arcot nodded, and unconsciously tensing, he closed the switch. This put the powerful Arcot oscillator tubes into action, and the power was ready for application.