“The first contains about twenty-five gallons of water, to which I add a few drops of sulphuric acid, so as to augment its capacity as a conductor of electricity, and then I decompose it by means of a powerful Buntzen battery. Water, as you know, consists of two parts of hydrogen to one of oxygen gas.
“The latter, through the action of the battery, passes at its positive pole into the second receptacle. A third receptacle, placed above the second one, and of double its capacity, receives the hydrogen passing into it by the negative pole.
“Stopcocks, of which one has an orifice twice the size of the other, communicate between these receptacles and a fourth one, which is called the mixture reservoir, since in it the two gases obtained by the decomposition of the water do really commingle. The capacity of this fourth tank is about forty-one cubic feet.
“On the upper part of this tank is a platinum tube provided with a stopcock.
“You will now readily understand, gentlemen, the apparatus that I have described to you is really a gas cylinder and blow-pipe for oxygen and hydrogen, the heat of which exceeds that of a forge fire.
“This much established, I proceed to the second part of my apparatus. From the lowest part of my balloon, which is hermetically closed, issue two tubes a little distance apart. The one starts among the upper layers of the hydrogen gas, the other amid the lower layers.
“These two pipes are provided at intervals with strong jointings of india-rubber, which enable them to move in harmony with the oscillations of the balloon.
“Both of them run down as far as the car, and lose themselves in an iron receptacle of cylindrical form, which is called the heat-tank. The latter is closed at its two ends by two strong plates of the same metal.
“The pipe running from the lower part of the balloon runs into this cylindrical receptacle through the lower plate; it penetrates the latter and then takes the form of a helicoidal or screw-shaped spiral, the rings of which, rising one over the other, occupy nearly the whole of the height of the tank. Before again issuing from it, this spiral runs into a small cone with a concave base, that is turned downward in the shape of a spherical cap.
“It is from the top of this cone that the second pipe issues, and it runs, as I have said, into the upper beds of the balloon.