Separation of the Aluminium Group from the Zinc Group by Means of Ammonium Chloride and Ammonium Hydroxide.
Separation of Cobalt and Nickel from the Other Members of the Zinc and Aluminium Groups.
Aluminium Group: Fe2S3, Al(OH)3, Cr(OH)3.
Zinc Group: NiS, CoS, FeS, MnS,[385] ZnS.
If such a precipitate is treated, in the cold, for a short time with quite dilute (1 to 1.2 molar) hydrochloric acid, all of the hydroxides and sulphides dissolve, excepting the greater part of the nickel and cobalt sulphides, which dissolve very much more slowly than do the other compounds. Advantage is taken of this fact, to separate these two elements from the remaining members of these groups, and if the treatment is carried out with care, the separation is usually satisfactory. In all cases, however, since it is a question of delayed solution only, at least traces, and sometimes considerably more than traces, of the sulphides of nickel and cobalt go into solution with the other compounds. No sacrifice of analytical accuracy is involved, if this possible loss is kept in mind and provision made for the later detection of these small quantities of nickel and cobalt.
The question of the slow solution, or apparent lack of solubility, of nickel and cobalt sulphides in dilute hydrochloric acid has formed an interesting problem for investigation. While nickel and cobalt sulphides are precipitated by ammonium sulphide, these sulphides, in common with those of all the other members of the zinc group, are not precipitated by hydrogen sulphide in the presence of a small excess of hydrochloric acid.[386] We would have [p193]
NiCl2 + x HCl + H2S ⥃ NiS + (x + 2) HCl
as representing the condition of equilibrium, if we start with nickel chloride, hydrochloric acid and hydrogen sulphide; the amount of sulphide NiS, formed, is insufficient to supersaturate the solution and form a precipitate. In reversible reactions the final condition of equilibrium must be independent of the order in which components are mixed (p. [91]), a conclusion which is borne out by experience. One should expect, then, that nickel sulphide, when treated with dilute hydrochloric acid, would dissolve and give nickel chloride, hydrogen sulphide and an excess of acid, and thus produce the same system, found to be in equilibrium, when one starts with the chloride, hydrogen sulphide and hydrochloric acid. As a matter of fact, the same condition of equilibrium is finally reached, only it is reached slowly,[387] much more slowly than ordinarily in such cases, much more slowly, for instance, than with ferrous sulphide, hydrochloric acid and hydrogen sulphide (exp.). By taking advantage of this slow return to equilibrium and by working with the system during the process of slow change (collecting the undissolved nickel and cobalt sulphides on a filter), one can separate the sulphides of nickel and cobalt from the other components of the mixed precipitate, which dissolve much more rapidly.
Separation of the Aluminium and Zinc Groups by Means of Barium Carbonate.
When zinc chloride, which may be taken as a representative of the bivalent group, is treated with sodium carbonate, a difficultly soluble carbonate is precipitated, since zinc hydroxide, like the remaining bivalent hydroxides, is a sufficiently strong base to form a fairly stable carbonate.[388] When ferric chloride, a representative of the trivalent group, is treated with a solution of sodium carbonate, ferric hydroxide, mixed with some basic ferric carbonate[389] Fe2(OH)4CO3, is precipitated and carbon dioxide escapes (exp.). The trivalent hydroxides are too weak bases[390] to form stable salts with so weak an acid as carbonic acid.