Combing
The combing is omitted for short fiber cotton, but is used in worsted spinning and with long staple cotton to remove the short fibers. Cotton to be used for making yarn suitable for hosiery, underwear, sewing thread, lace, and for very fine cotton fabrics is carded.
In drawing, from six to sixteen "slivers" are run together and the fibers drawn out in several stages until the soft rope is about an eighth of an inch in diameter, called "roving." This tends to get rid of any unevenness and makes the fibers all parallel. From this machine the roving is wound on a bobbin ready for the spinning frame.
COTTON CARD
The roll of webbing A is beaten and transferred to the cylinder H H, carded by the spiked belt E, removed by the "doffer" and formed into a "sliver" which runs into the can M.
Spinning
The spinning frame may have a hundred spindles or more, each one of which is drawing out its supply of "roving" to the required size of yarn and giving it the twist necessary to bind the fibers together. The yarn to be used for the warp is given a harder twist so that it may be strong enough to stand the strain in weaving. The yarn for filling is usually left soft.