The Romance of Aircraft

by Laurence Yard Smith

Undoubtedly the engine problem has been the big one in the history of aviation. The coming of the internal combustion engine might be said to have placed practical aviation within the range of possibility, but at that it took a long time to evolve a motor especially suited to the needs of aircraft. There were three things needed in an airplane motor: Light weight, high power, and absolute reliability. How important the third factor is we can imagine if we stop to think that nothing keeps the heavier-than-air machine afloat but its own speed, creating an air pressure beneath its wings. Like the boy who runs with his kite in order to make it go up, the airplane must “go” if it would rise, and the moment its engine fails there is nothing to prevent it from falling to the earth. The driver of a motor car, can, if his engine goes wrong, get out and go over it carefully until he finds what the difficulty is. The pilot of an airplane, soaring thousands of feet above the earth, is at the mercy of his motor's reliability or lack of it. Engine failure was, and still is, one of the greatest dangers the airman has to fear. Another chief cause of trouble in early airplane motors was overheating. Before actual airplane engines had been designed there was nothing to do but to use the type of engine which had been designed for the automobile, with as much reduction in weight as could be secured. But the automobile engine was never intended to run at top speed continuously and for long periods, as the airplane engine necessarily must do. In a car the motor has little stops and rests, as it is throttled down for a moment or changes in speed are made, and these breathing spells help it very much indeed in the “cooling off” process. The airplane engine does not have these little between-time naps. The result was that the automobile engine installed in the early airplane invariably overheated and caused serious trouble. Under these conditions no flights of any distance could possibly be attempted.

Yet at the Rheims Meeting of 1909 Henry Farman surprised the world by remaining in the air two hours in a continuous flight. Up to that time the feat had never been equaled or approached. Aviators were amazed and sought an explanation. The answer was: the Gnome motor.

Anxious to help the airplane in its forward march, French engineers had good naturedly set to work and the Gnome motor was their first answer to the anxious question of “What engine?” It involved a new and ingenious system of cooling which made it possible for Farman to drive his big machine round and round the Rheims course until stopped by darkness, but without ever experiencing the slightest difficulty with his motor.

Before attempting to understand the secret of superiority of this first real airplane motor over others of its day, we must know a little more about the elementary principles of any internal combustion engine. The diagram on page 156 shows one cylinder of such an engine in action.

A mixture of gasoline and air—called “carbureted air”—is introduced through a valve opening into a chamber or cylinder, as shown in figure A of the diagram. The valve opening then closes, and the piston moves forward compressing the gases enclosed in the cylinder, as shown in figure B. An electric spark suddenly explodes these compressed gases, causing them to expand with the greatest violence and drive the piston back. This action, which is shown in figure C, is called the “power stroke,” for, transmitted by the piston rod to the crankshaft it furnishes the power which turns the propeller and sends the airplane forward through the air. Just before the piston reaches the end of the power stroke the exhaust valve opens, and the exploded gases are forced out of the chamber, partly by the force of their own tension and partly by the upward stroke of the piston, as shown in figure D.

DIAGRAM OF AN INTERNAL COMBUSTION ENGINE CYLINDER, SHOWING PRINCIPLE ON WHICH IT WORKS

The carbureted air is supplied to the cylinder from a chamber called the “carbureter.” Here it is produced by the mixture of a gasoline spray—similar to the fine spray of an atomizer—with the air.

A spark plug is fitted to the cylinder, and a break current from an electric magneto causes the spark which at the proper instant explodes the compressed gases.