Plate 24.
Another hole of similar size is bored 11" from this. These holes are all 5/8" from the edges.
On the other two legs the only two holes necessary are bored 12-1/2" from the rounded ends.
The shorter legs are attached by screws to a cleat which itself is screwed to the underside of the board, 4-1/2" from the large end. This cleat is 1" × 1-1/4" × 6-3/4" and is held in place with glue and 1-3/4" flat-head screws, countersunk. Two of these screws are sufficient.
The separating piece at the other end of the legs is 3/4" × 1-1/4" × 6-13/16", and is held in place by 1-1/2" brads and glue, and is attached 3-1/2" from the ends.
Two separating pieces are next made for the long legs, 3/4" × 1-1/4" × 5-1/4", and these are attached in the same manner as the pieces between the other set of legs.
A cleat 1-1/8" × 1-3/8" × 5-3/16" is attached with glue and 2" flat-head screws, 5-1/2" from the small end of the board. This holds the short legs in position.