The seat is made 3/8" × 4-1/2" × 5-1/8", and the front board of the seat measures 3/8" × 3-1/2" × 5-1/8". The seat is rounded on the front edge, and the front board of seat is beveled at top and bottom to set snugly under the seat, at the slight angle shown. This angle is obtained by measuring in 1-3/8" from the front, as shown in the side view.
Sandpaper all pieces thoroughly and assemble the sides and back first, with glue and 3/4" brads. Set these brads below the surface and fill the cavity with hard beeswax. Assemble the seat and front board next, and then nail these between the sides of the chair, as shown in the drawing.
Finish as desired. See Pages [15] to [18] for method of staining and painting.
Plate 30.
[RING-THE-HOOK GAME.]
This game is very simple in construction yet affords a great deal of pleasure to young people. ([Plate 31].)