The Dude.
Make the hair of raw cotton blackened with ink, and fasten it on the head with mucilage. When all of the foregoing directions have been carried out it is time to attend to the head-dresses, and we will begin with the quaint and old-fashioned poke-bonnet. Cut this bonnet from ordinary brown wrapping-paper after the pattern shown in diagram; sew together the ends of the “side of crown,” then sew the curved side (which is cut in slits as shown in pattern, and folded back as indicated by dotted line) to the smallest part of brim; fold in the strips marked on the straight “side of crown” and fasten on the “top of crown” with mucilage. The trimming for the bonnet consists of a fold and bow of colored tissue paper.
Make the man’s hat of shiny black paper by the pattern in diagram, and fasten together in the same manner as the bonnet, rolling the sides of the brim when finished. Black and white tissue-paper folded to fit the head, as shown by the dotted lines in the pattern, forms the head-dress of the nun.
By copying the head-dresses of different nations, an odd and curious assembly of these Easter-egg dolls can be formed; but that must be worked out at some future time, for we have yet to tell how to construct some Easter toys that cannot be found in any store. The
Humpty Dumpty
who “sat on a wall,” and the “Humpty Dumpty” who “had a great fall,” must have been like the one I am about to describe, made of an egg; for it is pretty certain that if he should fall, “all the king’s horses and all the king’s men couldn’t put” this “Humpty Dumpty together again” any more than they could the other.
Diagram of Humpty Dumpty.
The diagram shows the frame of this little fellow and how it is joined together. A large egg should be chosen; and when the contents have been blown from the shell, four holes must be pricked in it for the arms and legs to pass through, as shown in the diagram. These limbs are made of rather fine bonnet-wire, the piece used for the arms being about eight inches long. The hand is made by bending up one end of the wire as in diagram, and with softened beeswax covering the loop thus formed. When one hand has been finished off in this way, the other end of the wire, still straight, should be passed through one of the holes near the small end of the shell and out through the one opposite, then bent up into a hand and arm in the same manner as described.