Grass napkin-ring.
| Fig. [72].—Take one blade from each bunch and cross them. | Fig. [73].—Bring C over A and D under B and over C. |
Select ten fine long blades of grass, divide them into two bunches of five each, put the root-ends together, and tie them as when making the hammock. Pin these two bunches to your knee about two inches apart, and taking one blade from each bunch, cross them as in [Fig. 72], the right-hand grass A on top of the left-hand grass B. Now bring the left-hand grass C over A, and the right-hand grass D under B and over C ([Fig. 73]). Next weave the left-hand grass E under A and over D, then the right-hand grass F over B, under C, and over E. Weave the remaining four grasses in the same way, taking first from one side, then from the other. When your work has reached the stage shown in [Fig. 74], take the grass A, turn it under and weave it in and out as in [Fig. 76], then the grass B, turn it over and weave until it crosses A ([Fig. 76]). D comes next, to be woven until it crosses B, then C, which will cross D. On the left hand always turn the grasses under before beginning to weave, on the right hand turn them over before beginning to weave.
| Fig. [74]—Weave the remaining grasses in the same way. | Fig. [76].—Turn the grass A under, and weave it in and out. |
When You Have Woven
or braided a strip about five inches long, untie the two knots at the top, form the braid into a ring and tie the opposite ends together in two knots. The groups G and G in [Fig. 77] form one knot, the groups H and H the other knot. Trim the ends off neatly and the napkin-ring will look like the one in the illustration.
Fig. [77].—Tie the opposite ends together.