Fig. 79—A spool memorial arch.
The Parthenon
Fig. 80—The Parthenon made of spools.
If you have enough spools, you can make a miniature representation of one of the most beautiful temples ever built. Begin by standing four spools in a row for the first end of the building, allowing about the width of a spool between each two. Place eight in a row for the first side, four for the other end, and eight for the second side ([Fig. 80]). Have the spools all of the same size, that the walls may be alike and perfectly even, because, as you know, the walls are to be formed of columns, not as many as in the original, but enough to give an idea of the Greek temple. Build up the spools three deep into pillars; then lay a piece of pasteboard on the top of the columns for a ceiling. Bend another piece of pasteboard lengthwise through the centre for the roof, and stand it tent-like on top of the ceiling. You can measure the correct size of the ceiling by laying a piece of pasteboard down flat on the floor along the eight-columned side of the Parthenon to obtain the length, and placing it flat on the floor across the four-columned side to mark the width. Make the roof the same length and a little wider than the ceiling, to allow for the height of the bend through the centre.
You must imagine a space immediately beneath the roof of the little Greek temple filled in with the most beautiful statuary, and think of the spools as white marble columns, and you should see, in fancy, another row of stately columns inside the ones you have built. Tell all about the real Parthenon and hunt up a picture of the temple that all may see just how near you came to making the little model look like the wonderful Parthenon on the Acropolis, in Athens.
After admiring the building for a while, pretend that a left-over spool