If burlap covers are used the cost of baling, including covering, ties, use of baling press, power, and labor will amount to at least 60 cents per bale, or about $3.75 per ton. If chip-board can be used the cost [ -6- ]may be reduced to about $2 per ton. The cost of hauling and loading on the cars will vary from $1 to $3 per ton, depending upon the distance and the roads. The farmer must therefore receive from $4 to $6 per ton for the hurds, baled, on board cars at his home station.
SUMMARY.
Hemp hurds are the woody inner portion of the hemp stalk, broken into pieces in removing the fiber.
They are not used at present for any purpose that would compete with their use for paper.
Hurds are available only from machine-broken hemp, for the cost of collecting them from the hand brakes would be too great.
About 7,000 tons are now available in restricted localities in Ohio, Indiana, Wisconsin, and California.
The quantity is likely to increase as the use of machine brakes increases.
The hurds may be baled in hemp-fiber presses, with partial burlap covers like those on cotton bales, or possibly chip-board covers.
It is estimated that the farmers may deliver the bales on board cars profitably at $4 to $6 per ton.