SEVEN SEVEN
Folo Loops........................ ETAOIN
FALLS 1,000 FEET, UNHURT.

Omaha, Sept. 25.—Francis Hoover, Chicago aviator, fell 1,000 feet at David City, Neb. He alighted in a big tank and was not injured.

The compositor in this case was at machine number 7, and the slug name given the story was Folo Loops: that is, it was a follow story, to come after the one slugged Loops.

22. The Proofs.—On receipt of the different takes by the bank-man, the various parts of the story are assembled, with the proper head, in a long brass receptacle called a galley, and the first, or galley, proof is "pulled" on the proof press, a small hand machine. Three proofs are made. One goes to the managing editor, on whom rests responsibility for every story in the paper; one to the news editor; and one, with the original copy, to the head proofreader, who is responsible for all typographical errors. The head proofreader in turn gives the proof to an assistant and the manuscript to a copyholder, who reads the story to the assistant for the detection of typographical errors. A corrected galley proof will be returned in the form shown in the specimen proof sheet printed on [page 276].

23. The Form.—After all corrections have been made and the position of the story in the paper has been determined by the news editor, it is inserted in its proper place among other articles which together make up a page of type, or what printers know as a form. This form is locked in an enveloping steel frame, called a chase, and carried to the stereotyping room, the second department in the mechanical composition of the paper. In the small newspaper offices, the sheet is printed directly from the form. But since the leaden letters begin to blur after 15,000 impressions have been made, and since it has been found impossible to do fast printing from flat surfaces, it is necessary for the larger papers to cast from four to twelve stereotyped plates of each page.

24. Stereotyping Process.—These stereotyped plates are circular or semicircular in shape, so that they fit snugly on the press cylinders. They are made in the following way: When the form is brought into the stereotyping room, it is placed, face up, on the flat bed of a strongly built press. Over the face of the columns of type are spread several layers of tissue paper pasted together. Upon the paper is laid a damp blanket, and a heavy revolving steel drum subjects the whole to hundreds of pounds of pressure, thus squeezing the face of the type into the texture of the moist paper. Intense heat is then applied by a steam drier, so that within a few seconds the moisture has been baked entirely from the paper, which emerges a stiff flat matrix of the type in the form.

25. The Autoplate.—This matrix in turn is bent to the shape of the impressing cylinder that later stamps the page, and is put into an autoplate, or casting machine, which presses molten metal upon the paper matrix, cools the metal, and turns out in a few moments the finished, cylindrical plates ready to be put on the press for printing. Duplicates follow at intervals of from fifteen to twenty seconds, so that several impressions of the same page may be made at once in the press room and the whole paper printed more quickly than if a single impression of a page were made at one time.

26. The Press Room.—The press room, the third and final stage in the mechanical composition of the paper, is where the printing is done on highly complicated machines. The larger the number of pages of the paper printed, the more complicated the presses, the marvel of them being their adaptability to running full, or half, or third capacity, according to the needed output, or to printing a double or triple number of small sized papers in a third or half the usually required time. The large presses of the great dailies print, fold, cut, paste, and count, according to the size of the sheet, 50,000 to 125,000 papers an hour. A double sextuple press has a limit of 144,000 twelve-page papers an hour.

27. The Printing Press.—It is on the cylinders of these presses that the circular stereotyped plates are fitted, two plates filling nicely the round of the cylinder. All the plates for the inside pages of the paper are stereotyped and screwed on their cylinders a half-hour or more before press time, the pages with the latest news being held until the last possible moment. Usually the last page to come is the title page, and as soon as the last locking lever has been clamped, the wheels of the big press begin to turn. As the cylinders with their plates revolve, raised letters on the surface of the plate come in contact, first with the inked rollers, then with the paper, which is spun from large rolls and drawn through the press, obtaining as it goes the impression of the pages of type. As the printed ribbon of paper issues from beneath the cylinders, it is cut into pages, folded, and counted, ready for the circulation department. The whole period of time elapsing between the chute of the last story from the city room and the delivery of the printed pages to the newsboys will not have exceeded ten minutes.