Bicycling for Ladies / The Common Sense of Bicycling; with Hints as to the Art of Wheeling—Advice to Beginners—Dress—Care of the Bicycle—Mechanics—Training—Exercise, etc., etc.

by Maria E. Ward

Use the weight as much as possible to propel, and reserve the push for hard grade-work. Keep the knees well turned in; it squares the foot and prevents the ankle from receiving hard knocks. When the knee is turned out, the ankle bones are turned in, and so receive many a bruise that could have been avoided. To keep the ankles from interfering, turn the knees in, and ride square leg.

FOLLOWING PEDAL.

Controlling a bicycle on a down-grade requires pressure on the ascending pedal. Point the heel down or hold the toe up, and an even pressure will be maintained. Let the lift come with the heel well squared and the leg as straight as possible, the weight to be supplied at the right point on the up stroke to control the machine. Always use the weight when possible as a supplementary driving power.

The pedals differ in construction and in material, being differently adapted for racing and for road work. A pedal with a good broad resting surface for the foot is very comfortable, though a “rat-trap” pedal used with a stiff-soled shoe is lighter and preferable. Toe-clips are desirable for those who can use them easily, but for a novice they are dangerous, being liable to cause the mishaps they are intended to prevent. Experienced bicyclers prefer any discomfort to that of a lost pedal, and when wheeling with only a light, even pressure, toe-clips are good reminders; but their principal use is to apply more power and help the foot to carry the pedal around and back.

The swaying of the body controls the bicycle from the saddle. In walking the bicycle about, it is soon perceived that it may be directed by holding the saddle only. The pressure comes from the saddle, and the bicycle is swayed by the rider, by leg pressure against the saddle. There is little or no shoulder movement, and the body, though flexible, does not move perceptibly. When starting a machine, hold it well balanced by the handle-bars, and know how much inclination to allow. Take hold, and mount steadily and easily, and move off quietly, noting the running of the bicycle. Gradually increase the speed, leaning a little forward to lessen any sudden strain and to help the push on the pedals. Then increase the stroke to the desired speed, and the machine will take care of itself. Speed power may be increased, and it is good practice to slow, and start again at will.

Figure wheeling, with a good leader, is capital practice to insure steadiness and increase the power of control over the bicycle. It is not easy to stop suddenly when going at a good rate of speed, and it is well to know your limit of distance in such case; nor is it easy to spring alertly from the saddle when bringing up in a dangerous position, even when frightened into doing it. Back pedal hard, grip with the hands and press down, holding the bicycle still as you reach the ground. The pedals will not get in the way, and it is well to remember not to let go of the machine if you do not want to get hurt. To jump off and hold the bicycle still may at times prevent collisions.

The cyclist, however sure of his skill, should not throw his machine at any one, even inadvertently. There is much unnecessarily fine riding done—dashing between two passing vehicles, for instance, or rushing through a gap instead of wheeling slowly behind a wagon until an open space is reached; but some prefer the stimulation and excitement of danger to safety, and like to perform such hazardous feats.

LIFTING.