The Young Voyageurs: Boy Hunters in the North

by Mayne Reid

While waiting for the timbers to dry, paddles were made, and Norman, with the help of the others, prepared what he jokingly called his “dock,” and also his “ship-yard.” This was neither more nor less than a long mound of earth—not unlike a new-made grave, only three times the length of one, or even longer. It was flat upon the top, and graded with earth so as to be quite level and free from inequalities.

At length all the materials were considered quite ready for use, and Norman went to work to put them together.

His first operation was to untie the bundle of timbers, and separate them. They were found to have taken the exact form into which they had been bent, and the thongs being no longer necessary to keep them in place, were removed. The timbers themselves were next placed upon the bottom or kelson, those with the widest bottoms being nearer to “midships,” while those with the narrower bend were set towards the narrower ends of the plank. Thus placed, they were all firmly lashed with strong cords of watap, by means of holes pierced in the bottom plank. Fortunately Lucien happened to have a pocket-knife, in which there was a good awl or piercer, that enabled them to make these holes—else the matter would have been a much more difficult one, as an awl is one of the most essential tools in the construction of a bark canoe. Of course it took Norman a considerable time to set all the ribs in their proper places, and fasten them securely; but he was ably assisted by François, who waited upon him with much diligence, handing him now the awl, and then the watap, whenever he required them.

Norman’s next operation was the laying of his kelson “in dock.” The timbers being attached to it, it was lifted up on the earthen mound, where it reached quite from end to end. Half-a-dozen large heavy stones were then placed upon it, so that, pressed down by these upon the even surface of the mould, it was rendered quite firm; and, moreover, was of such a height from the ground that the young shipwright could work upon it without too much bending and kneeling.

The gunwale, already prepared, was next placed so as to touch the ends of the ribs all round, and these ends were adjusted to it with great nicety, and firmly joined. Strong cross-pieces were fixed, which were designed, not only to keep the gunwale from spreading or contracting, but afterwards to serve as seats.

Of course the gunwale formed the complete mouth, or upper edge of the canoe. It was several feet longer than the bottom plank, and, when in place, projected beyond the ribs at both ends. From each end of the bottom plank, therefore, to the corresponding end of the gunwale, a straight piece of wood was stretched, and fastened. One of these pieces would form the stem or cutwater, while the other would become the stern of the craft. The long poles were next laid longitudinally upon the ribs outside, and lashed in their places; and this done, the skeleton was completed, ready for the bark.

The latter had been already cut to the proper dimensions and shape. It consisted of oblong pieces—each piece being a regular parallelogram, as it had been stripped from the tree. These were laid upon the ribs longitudinally, and then sewed to the edge of the bottom plank, and also to the gunwale. The bark itself was in such broad pieces that two of them were sufficient to cover half a side, so that but one seam was required lengthwise, in addition to the fastenings at the top and bottom. Two lengths of the bark also reached cleverly from stem to stern, and thus required only one transverse seam on each side. There was an advantage in this arrangement, for where the birch-bark can only be obtained in small flakes, a great number of seams is a necessary consequence, and then it is extremely difficult to keep the canoe from leaking. Thanks to the fine birch-trees, that grew in abundance around, our boat-builders had procured the very best bark.

The canoe was now completed all but the “paying,” and that would not take long to do. The gum of the épinette had to be boiled, and mixed with a little grease, so as to form a species of wax. For this the fat already obtained from the buffaloes was the very thing; and a small tin cup which Basil had saved from the wreck (it had been strung to his bullet-pouch), enabled them to melt the gum, and apply it hot. In less than an hour the thing was done. Every crack and awl-hole was payed, and the canoe was pronounced “watertight,” and, as François added, with a laugh, “seaworthy.”

A small pond was near, at the bottom of the hill: François espied it.

“Come, boys,” cried he, “a launch! a launch!”