Figure 8.—Spore-print of Hypholoma sublatertium.
This family is divided into five series, according to the color of their spores. The spores when seen in masses possess certain colors, white, rosy, rusty, purple-brown and black. Therefore the first and most important part to be determined in locating a mushroom is to ascertain the color of the spores. To do this, take a fresh, perfect, and fully developed specimen, remove the stem from the cap. Place the cap with the gills downward on the surface of dark velvety paper, if you suspect the spores to be white. Invert a finger bowl or a bell glass over the cap to keep the air from blowing the spores away. If the spores should be colored, white paper should be used. If the specimen is left too long the spore deposit will continue upward between the gills and it may reach an eighth of an inch in height, in which case if great care is taken in removing the cap there will be a perfect likeness of the gills and also the color of the spores.
Figure 9.—Spore-print of a Flammula.
There are two ways of making these spore prints quite permanent. First take a piece of thin rice paper, muscilage it and allow it to dry, then proceed as above. In this way the print will stand handling quite a little. Another way, and that used to prepare the spore-prints in these photographs, is to obtain the spore-print upon Japanese paper as in the preceding method, then by an atomizer spray the print gently and carefully with a fixative such as is used in fixing charcoal drawings. Success in making spore-prints requires both time and care, but the satisfaction they give is ample recompense for the trouble. It is more difficult to obtain good prints from the white-spored mushrooms than from those bearing colored spores, because it is hard to obtain a black paper having a dull velvety surface, and the spores will not adhere well to a smooth-finished, glossy paper. For the prints illustrated I am indebted to Mrs. Blackford.
Figure 10.—Spore-print of a Boletus.