ILLUSTRATION 588.--The straight Gobelin stitch is worked over 2 threads in height with 1 thread between, so that the stitches appear more raised; they are worked over thin cord or a thick piece of wool.
ILLUSTRATION 589.--The raised or velvet stitch is worked over small round wooden meshes, and forms small raised loops. Take 2 similar meshes and as many threaded needles as there are colours in the work; make first a slanting stitch, as for the beginning of the common cross stitch, but instead of drawing out the needle straight under the place where it was inserted, draw it out exactly at the same place, so as to form a slanting stitch on the right and on the wrong side; then begin to work over 1 mesh; insert the needle above it and draw it out in a slanting direction underneath. On the wrong side of the work a regular cross stitch is formed. Illustration 589 shows 2 rows of velvet stitch completed and 2 rows being worked; the first of the latter is yet on the mesh, the second being worked so as to show the position of the wool upon the mesh. Observe that the rows of the velvet stitch are worked upwards, and that 2 meshes are necessary, because the lower one must not be drawn out before the next row is completed. The loops may be cut open if preferred.
ILLUSTRATION 590.--The plaited stitch is worked like the herring-bone stitch. Each stitch is worked over 4 threads in height and 4 in width. Illustration 590 shows one part of the plaited stitch completed, and the place where the needle is to be inserted for the next stitch is marked by a dot. For the next stitch the needle is carried under the 2 threads below the stitches of the preceding row.