EMBROIDERY
EMBROIDERY PATTERNS
[In working the following Embroidery Patterns it will be found advisable to trace the design clearly upon tracing-paper with a sharp-pointed lead pencil. The pattern thus traced must be perforated with a fine needle in a succession of tiny holes, at the rate of about twenty to the inch. Those ladies who possess a sewing-machine will find no difficulty in accomplishing this. Several thicknesses of paper can be perforated at the same time, if required, by any ordinary machine. To transfer the traced and perforated design to the fabric to be embroidered, it is only necessary to rub a small quantity of powder blue through the holes.]
131.--Insertion in Embroidery.
Material: Messrs. Walter Evans and Co.'s embroidery cotton No. 16.
This insertion is worked in raised satin stitch and buttonhole stitch. The outlines must first be traced and the space filled up with chain stitches. To work a leaf, begin at the point, working from right to left, making short stitches, and always inserting the needle close above the outline and drawing it out below. The holes left for the ribbon to pass through are worked in plain button-hole stitch, the dots are worked in raised satin stitch.