Specific heat is the amount of heat necessary to raise the temperature of a solid or liquid body a certain number of degrees; water is adopted as the unit or standard of comparison. The heat necessary to raise one pound of water one degree, will raise one pound of mercury about 30 degrees, and one pound of lead about 32 degrees.

Table of the Specific Heat of Equal Weights of Various Substances.

Solid bodies.Specific
Heat.
Wood (fir and pine)0.650
„ (oak)0.570
Ice0.504
Coal0.280
Charcoal (animal)0.260
„ (vegetable)0.241
Iron (cast)0.241
Coke0.201
Limestone0.200
Glass0.195
Steel (hard)0.117
„ (soft)0.116
Iron (wrought)0.111
Zinc0.095
Copper (annealed)0.094
„ (cold hammered)0.093
Tin0.056
Lead0.031
Liquids.
Water1.000
Alcohol0.158
Acid (pyroligneous)0.590
Ether0.520
Acid (acetic)0.509
Oil (olive)0.309
Mercury0.033
Gases.
Hydrogen3.409
Vapor of alcohol0.547
Steam0.480
Carbonic oxide0.245
Nitrogen0.243
Oxygen0.217
Atmospheric air0.237
Carbonic acid0.202

THE STEAM PUMP.

It is difficult to overestimate the importance, in connection with a steam plant, of the appliance which supplies water for the boiler, not only, but a hundred other uses. Upon the steady operation of the pump depends the safety and comfort of the engineer, owner and employee, and indirectly of the success of the business with which the “plant” is connected. Hence the necessity of acquiring complete knowledge of the operation of a device so important.

Fig. 102.

Pumps now raise, convey and deliver water, beer, molasses, acids, oils, melted lead. Pumps also handle, among the gases, air, ammonia, lighting gas, and oxygen. Pumps are also used to increase or decrease the pressure of a fluid.

Pumps are made in many ways, and defined as rope, chain, diaphragm, jet, centrifugal, rotary, oscillating, cylinder.

Cylinder pumps are of two classes, single acting and double acting. In single acting—in effect is single ended—in double acting, the motion of the cylinder in one direction causes an inflow of water and a discharge at the same time, in the other; and on the return stroke the action is renewed as the discharge end becomes the suction end. The pump is thus double acting.