Fig. 208 represents a very compact design of double acting low service belt driven pump. The water cylinder is bored and has a piston fitted to it; both ends of this cylinder are covered with “heads,” one of which has a stuffing box through which the piston operates; the outer end of this piston rod is fitted to a slotted yoke which slides upon a guide at the bottom.
This mechanism, just described, takes the place of a pitman connection and occupies very much less space. The crank shaft is supported at each end in pillow blocks and is driven by a belt having a tight and loose pulley; larger sizes are geared. Access to the two sets of valves can be had by slacking up four nuts upon the long belts, two of which are shown in the engraving. The broad base secures great stability for this size pump.
Fig. 208.
Fig. 209.
Fig. 210.