Sewing buttons on the aprons, corset-cover, or other garment.
SUBJECT MATTER
This lesson should teach neatness in dress, through a consideration of the best methods of fastening garments. The position of the button is measured by drawing the right end of the band one inch over the left end. The place for the button should be marked with a pin on the left end of the band. A double thread is fastened on the right side of the band, drawn through one hole of the button, and back through the other, and then taken through the band close to the first stitch. A pin should be inserted on top of the button under the first stitch, left there until the button is firmly fastened in place, and then removed. Before the thread is fastened, it should be wrapped two or three times around the threads holding the button, between the button and the cloth, then fastened neatly on the wrong side with a few small stitches one on top of another.
Fig. 18.—Sewing on buttons
PRELIMINARY PLAN
Each pupil should come to the class with her apron as nearly completed as possible, and with three buttons to sew on it, for fastening the belt and straps.
METHOD OF WORK
The teacher should discuss the best methods of fastening garments and should demonstrate the method of sewing on buttons. The pupils should sew one button on the left end of the apron band in the middle of the width about 1 inch from the end, and another button 4 inches from each end of the band, to hold the shoulder straps.