STOCK BILL
| Lumber | Cut into the following pieces: | Finished Dimensions | Use |
| 1" × 8" × 12' | 2 | 13-16" × 2" × 32½ | Top side rails |
| 2 | 13-16" × 2" × 18½ | Top end rail | |
| 4 | 13-16" × 2" × 29¾" | Frame posts | |
| 1 | 13-16" × 2" × 30⅞" | Bottom side rail | |
| 2 | 13-16" × 2" × 18½" | Bottom end rails | |
| 1 | 13-16" × 5" × 14⅜" | Drop door | |
| 2 pieces, 1" × 4" × 12' flooring | 7 | ¾" × 3¼" × 32½" | Flooring (bottom) |
| 5 pieces, 1" × 4" × 14' yellow pine ceiling | 24 | ¼" × 3¼" × 31¼" | Ceiling (ends and side) |
| 1" × 12" × 12' | 3 | 13-16" × 10¼" × 32½" | Shelf |
| 1 | 13-16" × 8" × 32½" | Shelf | |
| 3 | 13-16" × 1¾" × 31¼" | Casing | |
| 2 | 13-16" × 1¾" × 14⅜" | Casing | |
| 1 | 13-16" × 5" × 14⅜" | Drawer front | |
| 1 | 13-16" × 5" × 14⅜" | Drawer front | |
| 2 pieces, 1" × 4" × 12' flooring | 8 | ¾" × 3¼" × 36" | Top |
| 2 pieces, 1" × 4" × 14' yellow pine ceiling | 10 | ¾" × 3¼" × 22⅞" | Doors |
| 2 pieces, 1" × 4" × 12' flooring | 12 | ¾" × 3¼" × 24" | Swing tops |
| ½" × 6" × 12' | 2 | 7-16" × 5" × 19⅝" | Drawer slides |
| 1 | 7-16" × 5" × 13½" | Drawer back | |
| 4 | 7-16" × 4¾" × 13½" | Drawer bottom | |
| ½" × 6" × 12' | 1 | 7-16" × 4½" × 13½" | Partitions |
| 3 | 7-16" × 4½" × 10" | Partitions |
TOOLS
| Rule | Steel square | |
| Lead-pencil | Plane | |
| Saw | ½ Chisel and | |
| Hammer | Screw-driver |
DIRECTIONS FOR MAKING
I Cutting and Squaring Stock—
Cut the stock only as needed, in the following order, and square up according to the directions previously given.
| 1. Frame; rip the 1" × 8"× 12' piece for the frame material | |
| 2. Bottom | 6. Casing |
| 3. Ends and sides | 7. Doors |
| 4. Shelves | 8. Swing tops |
| 5. Top | 9. Miscellaneous pieces |
II Assembling—