Fig. 38 shows a recent construction, three roller apparatus (case castings, cf. below) standing vertically, which accordingly takes up little room. The hopper is low-lying, whilst the discharging is effected from the upper roller, and accordingly admits of the occasional use of a somewhat larger size of transport trolley. This type also occurs with 6-9-12 rollers, as apparent from fig. 39.
Fig. 41 b.
Whilst these systems were exclusively supplied with rollers made of granite or hard porcelain up to a few years ago, it has been found that good results are obtained by the use of cast rollers, and they have been for some time employed on machines of three, four and five rollers. (Figs. 38, 40, 41 a-c.) In consequence of the non-porous surface of these steel rollers, it is possible to grind to a finest powder, merely in one operation, without passing the chocolate through the machine several times; and the so-called “Burning” of masses which have not been properly mixed cannot arise in this case, though it is true that the apparatus must be provided with water cooling arrangements to avoid a too excessive heat. They are specially adapted to the preparation of the more ordinary qualities, and are even occasionally employed for finer chocolates, for obviously these must be again submitted to a rolling process, when granite or porcelain rollers are preferred.
Fig. 41 c.
For this reason the 6, 9 or even 12 roller mills have been more discarded since the last grinding process has been performed by granite rollers (cold process).
In order to avoid the disadvantages of the pulley drive, it is in certain cases advisable to drive each machine direct from an electric motor. Fig. 42 illustrates a refining machine driven in this manner.
Fig. 42.