Fig. 79.
The tracings h and i in fig. 79 show the cross section and top view of the wire gratings, on which cylindrical and ball-shaped sugar goods are deposited. The other two kinds of grating are illustrated at L and M (fig. 80).
The size of the meshes of the sieve gratings depends on that of the centres to be coated.
The method of covering is as follows:
The centres for the pralinés etc. are placed in the cavities of the gratings, and, as soon as one of the gratings is full, the latter is covered up by the fine-meshed grating the half of the cross-section of which is shown in Fig. 79 and the full view in Fig. 80 (see K and N respectively), K representing the cover-grating.
Both gratings are held simultaneously by the operator at their handles and then dipped together in the liquid covering contained in the vessel a, Fig. 77, after which the superfluous covering mass is removed by knocking. The gratings are now deposited on the mechanism C, Figs. 77 or 78, as the case may be, the top sieve removed and a sheet of paper or a metal plate put in its place. It is then turned by hand to the opposite side, the grating with the impressions is removed and the cover centres are found lying in regular order, and at regular distances apart, on the metal plate. The object of the intervals between the covered centres is to prevent the running together of the latter.
Fig. 80.
Beans and rings are only dipped up to the middle, and the process repeated with the other half of the centre after the first half has cooled. This ensures a pleasing, round appearance, and has further the advantage that the cover grating need not be put on during the operation. When dipping cylindrical or ball-shaped centres, the grating K which has first been removed on dipping, is at once transferred to the heater, to prevent it cooling and withdrawing too much warmth from the covering material at the next immersion.