[CHAP. XIX.]
The Theory of Constructing the Furnaces most commonly used in Chymistry.
Skill in conducting and applying fire properly, and determining its different degrees, is of very great consequence to the success of Chymical operations.
As it is exceeding difficult to govern and moderate the action of fire, when the vessels in which any operation is performed are immediately exposed to it, Chymists have contrived to convey heat to their vessels, in nice operations, through different mediums, which they place occasionally between those vessels and the fire.
Those intermediate substances in which they plunge their vessels are called Baths. They are either fluid or solid: the fluid baths are water or its vapours. When the distilling vessel is set in water, the bath is called Balneum Mariæ, or the Water Bath; and the greatest degree of heat of which it is susceptible is that of boiling water. When the vessel is exposed only to the vapours which exhale from water, this forms the Vapour Bath; the heat of which is nearly the same with that of the Balneum Mariæ. These baths are useful for distilling essential oils, ardent spirits, sweet-scented waters; in a word, all such substances as cannot bear a greater heat, without prejudice either to their odour, or to some of their other qualities.
Baths may also be made of any other fluids, such as oils, mercury, &c. which are capable of receiving and communicating much more heat: but they are very seldom used. When a more considerable degree of heat is required, a bath is prepared of any solid matter reduced to a fine powder, such as sand, ashes, filings of iron, &c. The heat of these baths may be pushed so far as to make the bottom of the vessel become faintly red. By plunging a thermometer into the bath, by the side of the vessel, it is easy to observe the precise degree of heat applied to the substance on which you are working. It is necessary that the thermometers employed on this occasion be constructed on good principles, and so contrived as to be easily compared with those of the most celebrated natural philosophers. Those of the illustrious Réaumur are most used and best known, so that it would not be amiss to give them the preference. When a greater heat is required than any of those baths can give, the vessels must be set immediately on live coals, or in a flaming fire: this is called working with a naked fire; and, in this case it is much more difficult than in the other to determine the degrees of heat.
There are several ways of applying a naked fire. When the heat or flame is reflected upon the upper part of a vessel which is exposed to the fire, this is called a Reverberated heat. A Melting heat is that which is strong enough to fuse most bodies. A Forging heat is that of a fire which is forcibly excited by the constant blast of a pair of bellows, or more.
There is also another sort of fire which serves very commodiously for many operations, because it does not require to be fed or frequently mended: this is afforded by a lamp with one or more wicks, and may be called a Lamp-heat. It is scarce ever employed but to heat baths, in operations which require a gentle and long continued warmth: if it hath any fault, it is that of growing gradually hotter.