Elements of the Theory and Practice of Chymistry, 5th ed.

by Pierre Joseph Macquer

Thirdly, from six to eight or ten inches high above the grate over the ash-hole, little apertures must be made in the walls of the furnace, of eight or ten lines in diameter, an inch from one another, and those in one side must be diametrically opposite to those in the other. The use of these holes is to receive bars of iron for the retort to rest on; which should be, as I said, at different heights, in order to accommodate retorts of different sizes. At the upper extremity of this part of the furnace, which reaches from the iron bars to the top, the heighth whereof should be somewhat less than the width of the furnace, must be cut a semi-circular aperture for the neck of the retort to come through. This hole must by no means be over the doors of the fire-place and ash-hole; for then, as it gives passage to the neck of the retort, it must of course be opposite to the receiver, and in that case the receiver itself would stand over against those two apertures; which would be attended with this double inconvenience, that the receiver would not only grow very hot, but greatly embarrass the operator, whose free access to the fire-place and ash-hole would be thereby obstructed. It is proper therefore that the semi-circular cut we are speaking of be so placed that when the greatest ballons are luted to the retort they may leave an open passage to the fire-place and ash-hole.

Fourthly, in order to cover in the laboratory of the reverberating furnace, there must be a roof made for it in the form of a cupola, or concave hemisphere, having the same diameter as the furnace. This dome should have a semi-circular cut in its rim, answering to that above-directed to be made in the upper extremity of the furnace, so that, when adjusted to each other, the two together may form a circular hole for the neck of the retort to pass through. At the top of this dome there must also be a circular hole of three or four inches diameter, carrying a short tapering funnel of the same diameter, and three inches high, which will serve for a chimney to carry off all fuliginosities, and accelerate the current of the air. This passage may be shut at pleasure with a flat cover. Moreover, as it is necessary that the dome should be taken off and put on with ease, it should have two ears or handles for that purpose: a portative or moveable furnace should also have a pair of handles, fixed opposite to each other, between the ash-hole and the fire-place.

Sixthly and lastly, a conical canal must be provided of about three feet long, and sufficiently wide at its lower end to admit the funnel of the aperture at the top of the dome. This conical tube is to be applied to the dome when the fire is required to be extremely active: it tapers gradually from its base upwards, and breaks off as if truncated at top, where it should be about two inches wide.

Besides the apertures already mentioned as necessary to a reverberating furnace, there must also be many other smaller holes made in its ash-hole, fire-place, laboratory, and dome, which must all be so contrived as to be easily opened and shut with stopples of earth: these holes are the registers of the furnace, and serve to regulate the activity of the fire, according to the principles before laid down.

When the action of the fire is required to be exactly uniform and very brisk, it is necessary to stop carefully with moist earth all the little chinks in the juncture of the dome with the furnace, between the neck of the retort and the circular hole through which it passes, and which it never fills exactly, and, lastly, the holes which receive the iron bars that sustain the retort.

It is proper to have, in a laboratory, several reverberating furnaces of different magnitudes; because, they must be proportioned to the size of the retorts employed. The retort ought to fill the furnace, so as to leave only the distance of an inch between it and the inside of the furnace.

Yet when the retort is to be exposed to a most violent fire, and especially when it is required that the heat shall act with equal force on all parts of the furnace, and as strongly on its vault as on its bottom, a greater distance must be left between the retort and the inside of the furnace; for then the furnace may be filled with coals, even to the upper part of the dome. If moreover some pieces of wood be put into the ash-hole, the conical canal fitted on to the funnel of the dome, and all the apertures of the furnace exactly closed, except the ash-hole and the chimney, the greatest heat will then be excited that this furnace can produce.

The furnace now described may also be employed in many other chymical operations. If the dome be laid aside, an alembic may very well be placed therein: but then the space, which will be left between the body of the alembic and the top of the upper part of the furnace, must be carefully filled up with Windsor-loam moistened; for without that precaution the heat will soon reach the very head, which ought to be kept as cool as possible, in order to promote the condensation of the vapours. On this occasion therefore it will be proper to leave no holes open in the fire-place, but the lateral ones; of which also those over-against the receiver must be stopped.

A pot, or broad-brimmed earthen pan, may be placed over this furnace, and being so fitted to it as to close the upper part thereof accurately, and filled with sand, may serve for a sand-heat to distil with.