Be very careful to have the material quite straight and place the design on it squarely, or the final effect may be very twisted and distorted. If the pricking has left a jagged edge to the holes in the paper, rub the perforations lightly with sandpaper in order that the charcoal may go through cleanly and easily.

REDRAWING OF DESIGN

When the finished work is to be in more than one colour, it is advisable to strengthen the charcoal outline with pencil or Conté Crayon No. 2, otherwise it is washed off in the first dipping. This redrawing is not necessary if one wishes to have an undyed outline edging the different colours, as in that case the outline of the whole design will be drawn in, in wax, and this will permanently indicate the pattern.

PREVENTING THE WAX FROM STICKING

The American method of working differs from the Javanese in the fact that the native hangs her material vertically in front of her when she is waxing her design, whilst the American is decidedly more comfortable with his material flat on a table. Usually it is stretched on a frame or canvas-stretcher to prevent it from coming in actual contact with the surface of the table whilst the wax is being applied. If it is not kept clear, it will be found that when an attempt is made to lift the textile, on the completion of the waxing process, it will be sticking in places and the wax torn in consequence; the effect of this damage will be that in dyeing the colour will penetrate from the back, and the material exposed by the breaks will turn out to be some shade quite unplanned for in the original scheme. For very big pieces, however, it is rather impractical to use a frame and as an alternative to stretching, the fabric can be waxed on a table which is covered with thin smooth paper; with careful lifting, little or no harm need be done to the wax, but in any case it is well to make a thorough examination of the reverse side in order to be sure that there are no exposed surfaces that should be retouched.

Some artists work with a sheet of glass under their material, instead of paper, but this, whilst having the advantage of not sticking as much has the great objection of rapidly cooling the wax with which one is working and cool wax does not penetrate the material properly.

THE RIGHT WAY TO HOLD THE TJANTING

THE USE OF THE BRUSH FOR FILLING SPACES