Side-board. Begin with two equal squares. Cut and fasten one square together as for rabbit hutch (Fig. 6), but cut two doors. One quarter of the second square must be cut and gummed on to back to form a mirrored top (Fig. 25). A piece of silver paper may be gummed on to back for a mirror. From the rest of the second square plates and dishes can be cut and coloured to go on top and inside sideboard.
Fig. 25
Fig. 26
Fig. 27
An Arm-chair. Begin with square folded into sixteen parts (Fig. 26), cut off one quarter D H N S, again cut off one quarter O P R. Cut remaining square as in diagram. Gum E to A and G to C. Cut these squares to form arms. Gum O to K and R to M to form back legs and sides. To strengthen chair cut off N from D H. Gum H to P and D to B. The corners of B are rounded. Coloured paper can be pasted over the arms and in the middle of back, seat and sides (Fig. 27). Legs can be chalked on P, L, K and M, or cut out as shown in the figure. If preferred the arms are not folded over but cut round. This arm-chair is a strong one and will hold a heavy doll.
Fig. 28