Glasgow Docks.
Dundee Docks.
Leith Docks.
Birkenhead Docks.
So much for docks in passing. Let us now turn our attention to the process of:—
Building a Ship.
As we think it highly improbable that any of our readers intend to become either ship-carpenters or ship-architects, we will not worry them with technical explanations. To give an easily understood and general idea of the manner of building a ship is all we shall attempt. The names of those parts only that are frequently or occasionally referred to in general literature shall be given.
The term ship is employed in two significations. In familiar language it denotes any large or small vessel that navigates the ocean with sails. In nautical language it refers solely to a vessel having three masts, each consisting of a lower-mast, a top-mast, and a top-gallant-mast. At present we use the term ship in the familiar sense.
Elaborate and complicated drawings having been prepared, the shipbuilder begins his work.
The keel is the first part of a ship that is laid. It is the beam which runs along the bottom of a boat or ship from one end to the other. In large ships the keel consists of several pieces joined together. Its uses are, to cause the ship to preserve a direct course in its passage through the water; to check the leeway which every vessel has a tendency to make; and to moderate the rolling motion. The keel is also the ground-work, or foundation, on which the whole superstructure is reared, and is, therefore, immensely strong and solid. The best wood for keels is teak, as it is not liable to split.