Now I would advise all Bell hangers to hang Bells with bolts of Iron to come from the Cannons through the Stock, and to fasten them with Keys at the top of the Stock, and not with plates nailed on the sides; for they are mighty inconvenient to fasten a bell that is loose in the Stock, or to alter the stroke.
As for the Rowle, let it not be without, nor within the hollow of the side of the Wheel; nor above, nor below the hollow at the bottom of the Wheel. Now the bigger a Wheel is, if the Frame will permit, the bell will go the better; when the wheel is new, nail Stays from the Stock to each Spoke, to keep it from warping.
'Tis very convenient (if the Frame will permit) to fasten a piece of Timber about half a foot long on the end of the main Spoke at the top of the Wheel (whereon the end of the bell-rope is fastned) with a notch on the end of it; so at the setting of the bell, the Rope will hit into that notch from the Rowle, and this will make the bell lie easier at hand when it is set, and flie better.
FINIS.