The masts and main-topmast were somewhat attacked by decay, while the rest of the spars were good.
During and after the examination all the panelling and insulation was removed, the parts attacked by fungus or decay were also removed, and the woodwork coated with carbolineum or tar. The masts and various stores and fittings were taken ashore at the same time.
It was found that the rest of the vessel-that is, the whole of the lower part of the hull right up to the cabin deck-was perfectly sound, and as good as new. Nor was there any sign of strain anywhere. It is difficult to imagine any better proof of the excellence of the vessel's construction; after two protracted expeditions to the most northern regions to which any ship has ever penetrated, where the vessel was often exposed to the severest ice-pressure, and in spite of her being (in 1907) fifteen years old, the examination showed that her actual hull, the part of the ship that has to resist the heavy strain of water and ice, was in just as good condition as when she was new.
The vessel was then left in this state until, as already mentioned, Roald Amundsen and her builder, Colin Archer, came down to the dockyard on June 1, 1908, and with the necessary assistance made an examination of her.
After some correspondence and verbal conferences between Roald Amundsen and the dockyard, the latter, on March 9, 1909, made a tender for the repairs and alterations to the Fram. The repairs consisted of making good the damage to the topsides referred to above.
The alterations were due in the first instance to the circumstance that the steam-engine and boiler (the latter had had its flues burnt out on Sverdrup's expedition) were to be replaced by an oil-motor; as a consequence of this the coal-bunkers would disappear, while, on the other hand, a large number of oil-tanks, capable of containing about 90 tons of oil, were to be put in. It was also considered desirable to rig square-sails on the foremast in view of the great distances that were to be sailed on the proposed expedition.
The present arrangement of the vessel will best be followed by referring to the elevation and plan (Figs. 1 and 2).
In the extreme after-part of the lower hold is placed the 180 horse-power Diesel engine, surrounded by its auxiliary machinery and air-reservoirs.
In addition, some of the tanks containing the fuel itself are placed in the engine-room (marked O); the other tanks shown in the engine-room (marked 9) serve for storing lubricating oil. The existing engine-room was formerly the engine and boiler room, with coal-bunkers on both sides in the forward part. Forward of the watertight bulkhead of the engine-room we have, in the lower hold, the main store of oil-fuel, contained in tanks (marked O) of various sizes, on account of their having to be placed among the numerous diagonal stays. The tanks are filled and emptied by means of a pump and a petroleum hose through a manhole in the top, over which, again, are hatches in the deck above; no connecting pipes are fitted between the different tanks, for fear they might be damaged by frost or shock, thus involving a risk of losing oil. The main supply tank for fuel is placed over the forward side of the engine-room, where it is supported on strong steel girders; inside this tank, again, there are two smaller ones -- settling tanks -- from which the oil is conveyed in pipes to the engine-pumps. The main tank is of irregular shape -- as will be seen from the drawing -- since a square piece is taken out of its starboard after-corner for a way down into the engine-room. Besides this way down, an emergency way leads up from the engine-room, right aft, to one of the after-cabins. The oil hold is closed forward by a watertight bulkhead, which goes up to the main-deck. The hold forward of the oil-supply is unaltered, and serves for stowing cargo (mainly provisions), as does the hold above the oil-supply and below the main-deck.
On the main-deck right aft we now find a space arranged on each side of the well for the propeller and rudder; the lower part of this space is occupied by two tanks for lamp-oil, and above the tanks is a thin partition, which forms the floor of two small sail-rooms, with hatches to the deck above. Around the mizzenmast is the after-saloon, with eight cabins leading out of it. From the forward end of the after-saloon two passages lead to the large workroom amidships. These passages run past what were formerly coal-bunkers, but are now arranged as cabins, intended only to be used in milder climates, as they are not provided with any special insulation. From the port passage a door leads to the engine-room companion. In the after-part of the large workroom is the galley. This room is entirely lined with zinc, both on walls and ceiling (on account of the danger of fire), while the deck is covered with lead, on which tiles are laid in cement. Forward of the galley is the main hatch, and two large water-tanks are fitted here, one on each side. The remainder of the workroom affords space for carpenter's benches, turning-lathes, a forge, vices, etc. From the workroom two doors lead into the fore-saloon with its adjoining cabins. Amundsen's cabin is the farthest forward on the starboard side, and communicates with an instrument-room. From the fore-saloon a door leads out forward, past a sixth cabin.