30 July 1964
Introduction
On display in the National Air Museum, Smithsonian Institution, is the first oil-burning engine to power an airplane. Its label reads: “Packard Diesel Engine—1928—This first compression-ignition engine to power an airplane developed 225 hp at 1950 revolutions per minute. It was designed under the direction of L. M. Woolson. In 1931, a production example of this engine powered a Bellanca airplane to an 84 hour and 33 minute nonrefueled duration record which has never been equalled.—Weight/power ratio: 2.26 lb per hp—Gift of Packard Motor Car Co.”
Figure 1 (left).—Front view of first Packard diesel, 1928. Note hoop holding cylinders in place and absence of venturi throttles. This engine was equipped with an air pressure starting system. (Smithsonian photo A2388.)
Figure 2 (right).—Left side view of first Packard diesel, 1928. Heywood starter (air) fitting shown on the head of the next to lowest cylinder. (Smithsonian photo A2388C.)
This revolutionary engine was created in the short time of one year. Within two years of its introduction in 1928, airplane diesel engines were being tested in England by Rolls-Royce, in France by Panhard, in Germany by Junkers, in Italy by Fiat, and in the United States by Guiberson. Packard had demonstrated to the world the remarkable economy and safety of the airplane diesel engine, and the response was immediate and favorable. The novelty and performance of the Packard diesel assured it a large and attentive audience wherever it was exhibited. Yet in spite of its performance record the engine was doomed to failure by reason of its design, and it was further handicapped by having been rushed into production before it could be thoroughly tested.
History
The official beginning of the Packard diesel engine can be traced to a license agreement dated August 18, 1927, between Alvan Macauley, president of the Packard Motor Car Company of Detroit, Michigan, and Dipl. Ing. Hermann I. A. Dorner, a diesel engine inventor of Hanover, Germany.[1] Before the agreement was drawn up, Capt. Lionel M. Woolson, chief aeronautical engineer for Packard, tested an air-cooled and a water-cooled diesel that Dorner had designed and built in Germany.[2] Both engines attained the then high revolutions per minute of 2000 and proved efficient and durable. They demonstrated the practicability of Dorner’s patented “solid” type of fuel injection which formed the basis of the Packard diesel’s design.[3] Using elements from Dorner’s engines, Woolson and Dorner designed the Packard diesel with the help of Packard engineers and Dorner’s assistant, Adolph Widmann. Woolson was responsible for the weight-saving features, and Dorner for the combustion system.