([Click here to see a larger image])

Savery had created his vacuum by the condensation of steam in a closed vessel by dashing cold water against it. Papin had created his vacuum by exhausting the air in a cylinder, fitted with a piston, by means of an air pump. What Newcomen did was to combine both systems. Instead of employing Savery’s closed vessel, he made use of Papin’s cylinder fitted with a piston, but worked by the condensation of steam, still employing the clumsy system of dashing cold water against the cylinder.

Whilst the engine was still in its trial state an accident occurred that led to another change in the mode of condensation. It was this. In order to keep the cylinder as free from air as possible, great pains were taken to prevent it from passing down with the piston, and to keep the cylinder air-tight, water was employed to lie above the place where the piston passed up or down.

At one of the early trials the inventors were surprised to see the engine make several rapid strokes, and on looking into the cause found that there was a small hole in the piston, which allowed a jet of cold water to penetrate within, and that this acted as a rapid condenser of the steam.

A new light suddenly broke upon Newcomen. The idea of condensing the steam, and so producing a vacuum by injecting cold water into the receiver, instead of splashing it against the outside, at once occurred to him; and he proceeded to embody the principle which this accident had suggested, as part of his machine.

Another improvement was due to another accident, if so it may be termed. To keep the machine in action a man or boy had to be employed in turning alternately two taps, one admitting the steam into the cylinder, the other admitting the cold jet into it to condense it.

The story has been often told how that a boy named Humphry Potter was planted beside the engine to turn the cocks, and found that this was excessively tedious and monotonous work, and being a shrewd lad, observing the alternate ascent and descent of the beam above his head, worked by the piston, he thought that by attaching to the beam the levers that governed the cocks, that would do the work for him. The result was the contrivance of what he called the scoggan, consisting of a catch, worked at first by strings, and afterwards by rods, that did the work automatically. This story has however been discredited. See Galloway’s Steam Engine, 1881.

“Thus, step by step,” says Mr. Smiles, “Newcomen’s engine grew in power and efficiency, and became more and more complete as a self-acting machine. It will be observed that, like all other inventions, it was not the product of any one man’s ingenuity, but of many. One contributed one improvement, and another another. The essential features of the atmospheric engine were not new. The piston and cylinder had been known as long ago as the time of Hero (222–205 B.C.). The expansive force of steam and the creation of a vacuum by its condensation had been known to the Marquess of Worcester, Savery, Papin, and many more.

“Newcomen merely combined in his machine the result of their varied experience, and, assisted by the persons who worked with him, down to the engine-boy Potter, he advanced the inventions several important stages, so that the steam-engine was no longer a toy or a scientific curiosity, but had become a powerful machine capable of doing useful work.”[27]