The Mechanical Properties of Wood / Including a Discussion of the Factors Affecting the Mechanical Properties, and Methods of Timber Testing

by Samuel J. Record

The shearing strength per square inch is found by dividing the maximum load by the cross-sectional area.

(			P	)
	Q	=	---
			A

IMPACT TEST

Apparatus: There are several types of impact testing machines.[⁵⁹] One of the simplest and most efficient for use with wood is illustrated in [Figure 40]. The base of the machine is 7 feet long, 2.5 feet wide at the centre, and weighs 3,500 pounds. Two upright columns, each 8 feet long, act as guides for the striking head. At the top of the column is the hoisting mechanism for raising or lowering the striking weights. The power for operating the machine is furnished by a motor set on the top. The hoisting-mechanism is all controlled by a single operating lever, shown on the side of the column, whereby the striking weight may be raised, lowered, or stopped at the will of the operator. There is an automatic safety device for stopping the machine when the weight reaches the top.

Figure 40

Impact testing machine.

The weight is lifted by a chain, one end of which passes over a sprocket wheel in the hoisting mechanism. On the lower end of the chain is hung an electro-magnet of sufficient magnetic strength to support the heaviest striking weights. When it is desired to drop the striking weight the electric current is broken and reversed by means of an automatic switch and current breaker. The height of drop may be regulated by setting at the desired height on one of the columns a tripping pin which throws the switch on the magnet and so breaks and reverses the current.