All engines of whatever type up to about 1000 indicated horse-power are usually arranged with forged columns in front. The condenser is ordinarily designed to form part of the engine structure, having the columns cast on, and supporting the cylinders; but not infrequently it is entirely separate from the main engines, and is carried either on the back of the columns, or fitted in the wing of the ship.

Of engines for the Navy nothing need be said beyond stating that they form quite a class by themselves, and all present the special features of design so characteristic of Admiralty work referred to in an earlier Chapter. The latest types of large-size engines for the Admiralty are being fitted with a system of forced lubrication to main bearings and crank-pins.

The Scotts' practice with respect to paddle engines has been no less varied than that in the case of screw machinery, ranging as it does from the ponderous side-lever engine of past years to the stern-wheel engine of the shallow-draught steamers of the present day. Oscillating and diagonal engines, both compound and triple-expansion, are also within the experience of the Company, the three-stage expansion being the type now usually adopted.

With respect to auxiliary machinery, the Scotts invariably fit a separate centrifugal pump for circulating the water through the condenser for all classes of engines, excepting only those for the ordinary tramp steamer. The air, bilge, and sanitary pumps are usually worked from the main engine by levers. The feed pumps are generally independent. Frequently, especially in yachts, all the pumps are entirely independent of the main engines. The Scotts in some cases make all auxiliary machinery for their own engines: such as centrifugal pumps, fans, feed-heaters, auxiliary condensers, duplex feed and ballast pumps, etc.

Plate XXXVI.

[Larger image]

TYPICAL PROPELLING ENGINES.