CHAPTER III
THE PREPARATION AND USE OF THE PEN
To obtain a practical knowledge of the use of the pen as a letter-making tool is, as stated before, the first important thing for the student to acquire. All the practice he can get in cutting it to shape, and using it in the manner described here, will be found to be of the greatest service in helping him to produce good lettering with it later on.
For large writing, the best tool is undoubtedly the reed pen. In fact, this is probably the best pen for the beginner to experiment with first. It is somewhat difficult to obtain a good reed pen. The ordinary kind that is sold by the artists’ colourmen is rather too soft and soon becomes sodden with the ink. Crisp writing is then impossible. A pen made from a piece of hollow cane or bamboo seems to answer best of all.
A sharp knife is required for cutting, and a thin piece of metal to form a spring to hold the ink is a great advantage. It should be quite easy to see from [Fig. 5] how the pen should be cut. The great thing to remember is to see that the pen is cut with a nice chisel point, as this ensures crisp and sharp writing. Another important detail is the slit in the nib. This should be just the right length for easy writing. If it is too long it makes the pen too soft, while, on the other hand, if too short it is difficult to write with it. The student will find that experiment alone will teach him what is right in this matter. An hour or two spent experimenting for himself with a reed or quill will teach him far more than pages of instruction. Beyond just giving a few hints, there is no need to devote much space to directions as to how to cut the pen. The few details given are just to act as a guide to the student.
THE PEN
Fig. 5.
In cutting the nib, care should be taken that the slit is a clean cut, also that the points are equally proportioned on each side. The spring is best made from a piece of thin brass, copper, or pure tin. If, ordinary tinned iron is used it is liable to get rusty besides being generally too thick. It will be found that a great deal depends on the position in which this is placed, with regard to the flow of ink from the pen.
When using the reed pen for large writing it will be found necessary to pare the curved inside of the pen quite flat at the point, to ensure a firm stroke, as otherwise a hollow stroke will be the result.
For smaller writing the best pen is the turkey quill. The goose quill is not quite firm enough, but a good turkey quill can be cut either for quite tiny writing or large bold writing. It is best to strip the feather part right away, as there is no advantage in having it on the pen. This can easily be torn off by pulling the end of the feather downwards.