(2) Delay in commencing work. This means similar delay in collecting the latex which is exposed to greater heat than under ordinary circumstances.
(3) Exposure to the sun’s rays. The heating of the latex may provide improved conditions favourable to the development and action of micro-organisms.
(4) Allowing latex to stand too long before collection. This usually is the result of giving tappers too great a task.
(5) The addition of water to the latex, either purposely or accidentally, in the form of rain. The water may be slightly acid in character, or it may carry micro-organisms from the bark into the latex.
(6) Tapping trees at too great a height. The latex generally has an abnormal distance to travel before reaching the cup.
(7) Sometimes the latex from old trees, or from trees after wintering (just prior to full renewal of leaf), contains more than the usual proportion of substances (e.g., sugars), which are capable of effecting flocculation or coagulation.
(8) Too great a distance for transport. The trouble arising from this cause is likely to be much increased if the journey has to be made over bad roads. In such case the physical action augments the effect likely to be produced by long standing.
The foregoing do not include all possible causes, but serve to indicate the directions from which trouble may be mainly anticipated. It will be plain that any latex which exhibits symptoms of premature coagulation (or minute flocculation) should be regarded as a potential source of bubbles in sheet-rubber.
It will be equally obvious that the employment in the field of any harmless substance of an anti-coagulant nature is to be encouraged. This point is discussed in detail in [Chapter V].
In the Factory.—As a general rule it may be understood that the mischief has been done before the latex is handled at the factory. Sometimes it is perceptible from the peculiar appearance of the latex, and in such case the batch should not be used for the preparation of sheet-rubber. Often it is found that only the last to arrive at the store is visibly affected. This should not be mixed with other apparently normal latex, as it is capable of acting as a “leaven” to the bulk.